12

product

Wired Gas Cylinder Valve Actuator Match with Gas Leak Alarm

Model No.: SC-01T

Short Description:

The valve controller is installed on the gas cylinder and used together with the gas alarm. When the gas alarm detects gas leakage, it automatically closes the gas tank valve, adapts to large and small gas tanks, and can be used in homes, restaurants, etc. It adopts a positive pressing clutch button structure to facilitate the ball valve reset operation. Features: 1. Wired connection to gas alarm 2. Suitable for use in homes, restaurants and other places where gas cylinders are used 3. Install between the gas tank and the pressure reducing valve, easy to install 4. A variety of packages are available.


Product Detail

Product Tags

Smart valve controller-For a smart home

The samrt controller belongs to intelligent enviromental contolling equipment, which can connected with gas leakage alarm. when leakage happens, it will receive the signal from monitoring euipments such as gas alarm and close the valve in time.

Gas Cylinder Valve Actuator
sc01 (1)

Wire connected smart valve controller Advantages

1.Easy to be installed, You can quickly achieve intelligent control with our changing a new valve.
2.Unique look, It’s a better choice for a smart home.
3.Extended function, Reserve space for more intelligent improvment.
4.Lower cost, Wire connect type retains the core functionality and removes the extra expense.
5.Wired communication with various linkage alarms

Production Option

1. Standard type valve controller
2. a linked gas or water alarm

sc01 (3)

Valve controller’s installation

sc01 (2)

Valve controller *1

Bracket *1set

M6×30 screw *2

1/2” rubber ring *1(optional)

Hexagon wrench*1

sc01 (4)

when the tube is 1-inch, the rubber ring should be used inside of the bracket. when tube is 1/2'' or 3/4'', only to take off the rubber ring to fix the bracket throug the 2 screws

Adjust the controller position,
Ensure the output shaft of the manipulator
And the center line of the valve shaft
Coaxial line

less than 21mm tube, sub-accessories should be used.

sc01 (7)

Valve controller *1
Bracket *1set
M6×30 screw *2
1/2” rubber ring *1(optional)
Hexagon wrench*1

sc01 (9)

1,put the rubber ring on the tube

2,fix the bracket on the rubber ring

3, tighten the screw.

Butterfly  valve

sc01 (12)

1,put of the wrench

2,change the butterfly valve wrench, and tighten the screw。

3, fix the wrench to the butterfly valve

Mark: through the screwn to adjust the width of the butterfly valve wrench

sc01 (13)

Tech Specs

Operating temperature: -10℃-50℃,
Operating environment humidity: <95%
Operating voltage 12V
Operating current 1A
Max pressure 1.6Mpa
torque 30-60 N.m
Opening time 5~10s
Closing time 5~10s
Pipeline type 1/2’ 3/4’
Valve type Flat wrench ball valve, butterfly valve
connection Wired

Application

Gas Cylinder Valve Actuator

→ Tanks gas valve controling


  • Previous:
  • Next: