China China Manufacture Good-quality Wired Communication Gas/Water Valve Controller Link with A Gas/Water Alarm Manufacture and Factory

Wired Gas/Water Valve Actuator with Gas/Water Alarm

Model No.: SC-01

Short Description:

The valve controller/actuator is installed on the gas cylinder and used together with the gas alarm. When the gas alarm detects gas leakage, it automatically closes the gas tank valve, adapts to large and small gas tanks, and can be used in homes, restaurants, etc. It adopts a positive pressing clutch button structure to facilitate the ball valve reset operation.

Send email to us

Product Detail

Product Tags

Smart valve controller-For a smart home

The smart controller belongs to intelligent environmental controlling equipment, which can connect with gas or water leakage alarm. when leakage happens, it will receive the signal from monitoring equipment's such as gas or water alarm and close the valve in time.

Wire connected smart valve controller Advantages

1.Easy to be installed, You can quickly achieve intelligent control with our changing a new valve.
2.Unique look, It’s a better choice for a smart home.
3.Extended function, Reserve space for more intelligent improvement.
4.Lower cost, Wire connect type retains the core functionality and removes the extra expense.
5.Wired communication with various linkage alarms

Production Option

1. Standard type valve controller
2. a linked gas or water alarm

Valve controller’s installation

Valve controller *1

Bracket *1set

M6×30 screw *2

1/2” rubber ring *1(optional)

Hexagon wrench*1

when the tube is 1-inch, the rubber ring should be used inside of the bracket. when tube is 1/2'' or 3/4'', only to take off the rubber ring to fix the bracket through the 2 screws

Adjust the controller position,
Ensure the output shaft of the manipulator
And the center line of the valve shaft
Coaxial line

less than 21mm tube, sub-accessories should be used.

Valve controller *1
Bracket *1set
M6×30 screw *2
1/2” rubber ring *1(optional)
Hexagon wrench*1

1, put the rubber ring on the tube

2, fix the bracket on the rubber ring

3, tighten the screw.

Butterfly valve

1，put of the wrench

2，change the butterfly valve wrench, and tighten the screw。

3, fix the wrench to the butterfly valve

Mark: through the screw to adjust the width of the butterfly valve wrench

Tech Specs

Operating temperature：	-10℃-50℃，
Operating environment humidity：	<95%
Operating voltage	12V
Operating current	1A
Max pressure	1.6Mpa
torque	30-60 N.m
Opening time	5~10s
Closing time	5~10s
Pipeline type	1/2’ 3/4’
Valve type	Flat wrench ball valve, butterfly valve