Quots for China Standard Wholesale Male Thread Water Meter Brass Ball Valve with Swivel Nut
We always get the job done being a tangible team to make certain that we can easily give you the very best high quality and the most effective rate for Quots for China Standard Wholesale Male Thread Water Meter Brass Ball Valve with Swivel Nut, We warmly welcome your participation dependant on mutual added benefits within the in close proximity to future.
We always get the job done being a tangible team to make certain that we can easily give you the very best high quality and the most effective rate for China Water Valve, Control Valve, We set “be a creditable practitioner to achieve the continuous development and innovation” as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
Installation location
The motor valve may be installed in the smart gas meter.
Product Advantages:
Built-in screw Motor Valve’s Advantages
1.Low pressure drop
2.Stable structure Max pressure can reach 200mbar
3.Small shape, easy installing
4.Low costs
5.Snap design with high rust resistance
Instruction For Use
1.Two-line, four-line and five-line models are available for this type of valve. The red wire is connected to positive power (or negative power), and the black wire is connected to negative power (or positive power) to open the valve (specifically, it can be set according to customer needs). The other 2 or 3 wires can be signal wires of open/close.
2.Four-wire or five-wire valve opening and closing process time setting: When opening and closing the valve, when the detection device detects that the opening or closing valve is in place, it needs to delay 300ms before stopping the power supply, and the total time of opening the valve is about 1s.
3.The minimum drive voltage of the valve shall not be lower than 3V. If the current limit design is in the process of opening and closing the valve, the current limit value shall not be lower than 120mA
4.The motor valve opening and closing can be judged by detecting the locked-rotor current in the circuit. The locked-rotor current value can be calculated according to the working cut-off voltage of the circuit design, which is only related to the voltage and resistance value.
Tech Specs
Items | requirements | Standard |
Working medium |
Natural gas,LPG |
|
Flow range |
0.016~6m3/h |
|
Pressure Drop |
0~15KPa |
|
Meter suit |
G1.6/G2.5 |
|
Operating voltage |
DC3~3.9V |
|
ATEX |
ExicⅡBT4 Gc |
EN 16314-2013 7.13.4.3 |
Operating temperature |
-25℃~60℃ |
EN 16314-2013 7.13.4.7 |
Relative humidity |
5%~90% |
|
Leakage |
2KPa or 7.5ka <1L/h |
EN 16314-2013 7.13.4.5 |
Motor electric performance |
21±10%Ω/14±2mH |
|
Current-limited resistance |
9±1%Ω |
|
Max current |
≤140mA(DC3.9V) |
|
opening time |
≤1s(DC3V) |
|
Closing time |
≤1s(DC3V) |
|
Pressure loss |
With meter case≤200Pa |
EN 16314-2013 7.13.4.4 |
endurance |
≥10000次 |
EN 16314-2013 7.13.4.8 |
Installation location |
Inlet |
We always get the job done being a tangible team to make certain that we can easily give you the very best high quality and the most effective rate for Quots for China Standard Wholesale Male Thread Water Meter Brass Ball Valve with Swivel Nut, We warmly welcome your participation dependant on mutual added benefits within the in close proximity to future.
Quots for China Water Valve, Control Valve, We set “be a creditable practitioner to achieve the continuous development and innovation” as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.