Original Factory Brass Mini Ball Valve Manufacturer
To create extra value for customers is our enterprise philosophy; buyer growing is our working chase for Original Factory Brass Mini Ball Valve Manufacturer, We adhere towards the tenet of “Services of Standardization, to fulfill Customers’ Demands”.
To create extra value for customers is our enterprise philosophy; buyer growing is our working chase for China Mini Ball Valve and Brass Ball Valve, With a wide range, good quality, reasonable prices and stylish designs, our products and solutions are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
Installation location
The motor valve may be installed in the smart gas meter.
Product Advantages
Built-in B& Motor Valve’s Advantages
1.Low pressure drop
2.Stable structure Max pressure can reach 200mbar
3.Small shape, easy installing
4.Low costs
Instruction For Use
1. The lead wire of this type of valve has three specifications: two-wire, four-wire or six-wire. The lead wire of the two-wire valve is only used as the valve action power line, the red wire is connected to positive (or negative), and the black wire is connected to negative (or positive) to open the valve (specifically, it can be set according to customer requierements). For four-wire and six-wir e valves, two of the wires (red and black) are the power supply wires for valve action, and the remaining two or four wires are status switch wires, which are used as signal output wires for open and closed positions.
2. Power supply time requirements: when opening/closing valve, after the detection device detects that the valve is in place, it needs to delay 2000ms before stopping the power supply, and the total operating time is about 4.5s.
3. The motor valve opening and closing can be judged by detecting the locked-rotor current in the circuit. The locked-rotor current value can be calculated according to the working cut-off voltage of the circuit design, which is only related to the voltage and resistance value.
4. It is recommended that the minimum DC voltage of the valve should not be less than 3V. If the current limit design is in the valve’s process of opening and closing, the current limit value should not be less than 120mA.
Tech Specs
| Items | requirements | Standard |
|
Working medium |
Natural gas,LPG |
|
|
Flow range |
0.016～6m3/h |
|
|
Pressure Drop |
0～20KPa |
|
|
Meter suit |
G6/G10/G16/G25 |
|
|
Operating voltage |
DC3～3.9V |
|
|
ATEX |
ExicⅡBT4 Gc |
EN 16314-2013 7.13.4.3 |
|
Operating temperature |
-25℃～60℃ |
EN 16314-2013 7.13.4.7 |
|
Relative humidity |
5%～90% |
|
|
Leakage |
2KPa or 7.5ka ＜1L/h |
EN 16314-2013 7.13.4.5 |
|
Motor electric performance |
20±10%Ω/16±2mH |
|
|
Current-limited resistance |
12±1%Ω |
|
|
Max current |
≤130mA(DC3.9V) |
|
|
opening time |
≤4.5s(DC3V) |
|
|
Closing time |
≤4.5s(DC3V) |
|
|
Pressure loss |
With meter case≤200Pa |
EN 16314-2013 7.13.4.4 |
|
endurance |
≥10000 times |
EN 16314-2013 7.13.4.8 |
|
Installation location |
Inlet/outlet |
To create extra value for customers is our enterprise philosophy; buyer growing is our working chase for Original Factory Brass Mini Ball Valve Manufacturer, We adhere towards the tenet of “Services of Standardization, to fulfill Customers’ Demands”.
Original Factory China Mini Ball Valve and Brass Ball Valve, With a wide range, good quality, reasonable prices and stylish designs, our products and solutions are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
