12

product

OEM Manufacturer Automatic Gas Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng

Model No.:

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Remote Actuator, Control Gas Valve, Locking Gas Shut Off Valve, We put honest and health as the primary responsibility. We have a professional international trade team which graduated from America. We are your next business partner.
OEM Manufacturer Automatic Gas Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng Detail:

Installation location

The floating-ball valve can be installed on the gas pipeline

GDF (2)

Product Advantages

Gas pipeline ball valve’s feature and advantages
1. The working pressure is large, and the valve can be opened and closed stably in the working environment of 0.4MPa;
2. The valve opening and closing time is short, and the valve opening and closing time is less than or equal to 50s under the limit working voltage of 7.2V;
3. There is no pressure loss, and the zero pressure loss structure design with the valve diameter equal to the pipe diameter is adopted;
4. The sealing performance of the closing valve is good, and the seal is made of nitrile rubber with high temperature resistance (60℃) and low temperature (-25℃).
5. With limit switch, it can accurately detect the in-position status of the switch valve;
6. The on-off valve runs smoothly, without vibration and with low noise;
7. The motor and gear box are fully sealed, and the protection level is ≥IP65, which completely prevents the transmission medium from entering, and has good explosion-proof performance;
8. The valve body is made of aluminum, which can withstand 1.6MPa pressure, resist shock and vibration, and adapt to complex environments;
9. The surface of the valve body is anodized, which is beautiful and clean and has good anti-corrosion performance;

Instruction For Use

1. The red wire and the black wire are the power wires, the black wire is connected to the positive electrode, and the red wire is connected to the negative electrode to open the valve;
2. Optional in-position signal output lines: 2 white lines are the valve-open in-position signal lines, which are short-circuited when the valve is in place; 2 blue lines are the valve-close in-position signal lines, which are short-circuited when the valve is in place; (After the valve is opened or closed, the power supply is usually extended for 5s to ensure the stability of the in-position signal)
3. The deceleration box of the valve can be rotated 180 degrees as a whole according to the convenience of the customer to install the control box, and the valve can be used normally after rotation;
4. Use standard flange bolts to connect valves, pipes, and flowmeters. Before installation, the end face of the flange should be carefully cleaned to prevent iron slag, rust, dust and other sharp objects on the end surface from scratching the gasket and causing leakage;
5. The valve should be installed in the pipeline or flowmeter with the valve closed. It is strictly prohibited to use it in the state of overpressure or gas leakage and to detect leakage with open fire;
6. The appearance of this product is provided with a nameplate.

 

Tech Specs

No.号

Itrms

Requirement

1

Working medium

Nature gas LPG

2

Nominal diameter(mm)

DN25

DN40

DN50

DN80

DN100

3

Pressure range

0~0.4Mpa

4

Nominal pressure

0.8MPa

5

Operating Voltage

DC3~7.2V

6

Operating current

≤50mA(DC4.5V)

7

Max current

≤350mA(DC4.5V)

8

Blocked current

≤350mA(DC4.5V)

9

Operating temperature

-25℃~60℃

10

Storage temperature

-25℃~60℃

11

Operating humidity

5%~95%

12

Storage humidity

≤95%

13

ATEX

ExibⅡB T4 Gb

14

Protection class

IP65

15

Opening time

≤60s(DC7.2V)

16

Closing time

≤60s(DC7.2V)

17

Leakage

Under 0.4MPa, leakage ≤0.55dm3/h(compress time 2min)

Under 5KPa, leakage≤0.1dm3/h(compress time2min)

18

Motor risistance

21Ω±3Ω

19

switch contact resistance

≤1.5Ω

20

Endurance

≥4000 times

Structure Specs

GDF (1)

Diameter

L

H

ΦA

ΦB

n x ΦC

D

G

DN25

140

212

Φ115

Φ85

4 x Φ14

51

18

DN40

178

246

Φ150

Φ110

4 x Φ18

67

18

DN50

178

262

Φ165

Φ125

4 x Φ18

76

18

DN80

203

300

Φ200

Φ160

8 x Φ18

91

20

DN100

229

317

Φ220

Φ180

8 x Φ18

101

20


Product detail pictures:

OEM Manufacturer Automatic Gas Shut Off Valve - Pipeline Motor Floating-ball Valve  – Zhicheng detail pictures

OEM Manufacturer Automatic Gas Shut Off Valve - Pipeline Motor Floating-ball Valve  – Zhicheng detail pictures

OEM Manufacturer Automatic Gas Shut Off Valve - Pipeline Motor Floating-ball Valve  – Zhicheng detail pictures

OEM Manufacturer Automatic Gas Shut Off Valve - Pipeline Motor Floating-ball Valve  – Zhicheng detail pictures


Related Product Guide:

Sticking towards the theory of "Super Good quality, Satisfactory service" ,We are striving to become a superb business enterprise partner of you for OEM Manufacturer Automatic Gas Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng , The product will supply to all over the world, such as: Egypt, Georgia, Jersey, After years' creating and developing, with the advantages of trained qualified talents and rich marketing experience, outstanding achievements were gradually made. We get good reputation from the customers due to our good solutions quality and fine after-sale service. We sincerely wish to create a more prosperous and flourishing future together with all the friends home and abroad!
  • We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
    5 Stars By Elma from Spain - 2018.09.29 13:24
    The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
    5 Stars By Elizabeth from Hongkong - 2017.10.25 15:53