Hot New Products Flow Meter Controller - Built- in Motor Shut-off Valve for Business and Industrial Gas meter – Zhicheng
Hot New Products Flow Meter Controller - Built- in Motor Shut-off Valve for Business and Industrial Gas meter – Zhicheng Detail:
Installation location
The motor valve may be installed in the smart gas meter.
Product Advantages
Built-in B& Motor Valve’s Advantages
1.Low pressure drop
2.Stable structure Max pressure can reach 200mbar
3.Small shape, easy installing
4.Low costs
Instruction For Use
1. The lead wire of this type of valve has three specifications: two-wire, four-wire or six-wire. The lead wire of the two-wire valve is only used as the valve action power line, the red wire is connected to positive (or negative), and the black wire is connected to negative (or positive) to open the valve (specifically, it can be set according to customer requierements). For four-wire and six-wir e valves, two of the wires (red and black) are the power supply wires for valve action, and the remaining two or four wires are status switch wires, which are used as signal output wires for open and closed positions.
2. Power supply time requirements: when opening/closing valve, after the detection device detects that the valve is in place, it needs to delay 2000ms before stopping the power supply, and the total operating time is about 4.5s.
3. The motor valve opening and closing can be judged by detecting the locked-rotor current in the circuit. The locked-rotor current value can be calculated according to the working cut-off voltage of the circuit design, which is only related to the voltage and resistance value.
4. It is recommended that the minimum DC voltage of the valve should not be less than 3V. If the current limit design is in the valve’s process of opening and closing, the current limit value should not be less than 120mA.
Tech Specs
| Items | requirements | Standard |
|
Working medium |
Natural gas,LPG |
|
|
Flow range |
0.016～6m3/h |
|
|
Pressure Drop |
0～20KPa |
|
|
Meter suit |
G6/G10/G16/G25 |
|
|
Operating voltage |
DC3～3.9V |
|
|
ATEX |
ExicⅡBT4 Gc |
EN 16314-2013 7.13.4.3 |
|
Operating temperature |
-25℃～60℃ |
EN 16314-2013 7.13.4.7 |
|
Relative humidity |
5%～90% |
|
|
Leakage |
2KPa or 7.5ka ＜1L/h |
EN 16314-2013 7.13.4.5 |
|
Motor electric performance |
20±10%Ω/16±2mH |
|
|
Current-limited resistance |
12±1%Ω |
|
|
Max current |
≤130mA(DC3.9V) |
|
|
opening time |
≤4.5s(DC3V) |
|
|
Closing time |
≤4.5s(DC3V) |
|
|
Pressure loss |
With meter case≤200Pa |
EN 16314-2013 7.13.4.4 |
|
endurance |
≥10000 times |
EN 16314-2013 7.13.4.8 |
|
Installation location |
Inlet/outlet |
Product detail pictures:
Related Product Guide:
It adheres on the tenet "Honest, industrious, enterprising, innovative" to acquire new solutions regularly. It regards shoppers, success as its very own success. Let us establish prosperous future hand in hand for Hot New Products Flow Meter Controller - Built- in Motor Shut-off Valve for Business and Industrial Gas meter – Zhicheng , The product will supply to all over the world, such as: Rio de Janeiro, Bahrain, Eindhoven, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of "Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.
By EliecerJimenez from Mauritius - 2018.02.04 14:13
Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
By Eric from Somalia - 2018.07.26 16:51
