China Free sample for 12 Volt Gasoline Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng Manufacture and Factory

Free sample for 12 Volt Gasoline Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng

Model No.:

Short Description:

Product Detail

Product Tags

Feedback (2)

With reliable excellent approach, great name and ideal consumer services, the series of products and solutions produced by our company are exported to many countries and regions for Smart Linear Actuator, Bilge Alarm Sensor, Gas Stove Cut Off Valve, How about to start your good business with our company? We are ready, trained and fulfilled with pride. Let’s start our new business with new wave.

Free sample for 12 Volt Gasoline Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng Detail:

Installation location

The floating-ball valve can be installed on the gas pipeline

GDF (2)

Product Advantages

Gas pipeline ball valve’s feature and advantages
1. The working pressure is large, and the valve can be opened and closed stably in the working environment of 0.4MPa;
2. The valve opening and closing time is short, and the valve opening and closing time is less than or equal to 50s under the limit working voltage of 7.2V;
3. There is no pressure loss, and the zero pressure loss structure design with the valve diameter equal to the pipe diameter is adopted;
4. The sealing performance of the closing valve is good, and the seal is made of nitrile rubber with high temperature resistance (60℃) and low temperature (-25℃).
5. With limit switch, it can accurately detect the in-position status of the switch valve;
6. The on-off valve runs smoothly, without vibration and with low noise;
7. The motor and gear box are fully sealed, and the protection level is ≥IP65, which completely prevents the transmission medium from entering, and has good explosion-proof performance;
8. The valve body is made of aluminum, which can withstand 1.6MPa pressure, resist shock and vibration, and adapt to complex environments;
9. The surface of the valve body is anodized, which is beautiful and clean and has good anti-corrosion performance;

Instruction For Use

1. The red wire and the black wire are the power wires, the black wire is connected to the positive electrode, and the red wire is connected to the negative electrode to open the valve;
2. Optional in-position signal output lines: 2 white lines are the valve-open in-position signal lines, which are short-circuited when the valve is in place; 2 blue lines are the valve-close in-position signal lines, which are short-circuited when the valve is in place; (After the valve is opened or closed, the power supply is usually extended for 5s to ensure the stability of the in-position signal)
3. The deceleration box of the valve can be rotated 180 degrees as a whole according to the convenience of the customer to install the control box, and the valve can be used normally after rotation;
4. Use standard flange bolts to connect valves, pipes, and flowmeters. Before installation, the end face of the flange should be carefully cleaned to prevent iron slag, rust, dust and other sharp objects on the end surface from scratching the gasket and causing leakage;
5. The valve should be installed in the pipeline or flowmeter with the valve closed. It is strictly prohibited to use it in the state of overpressure or gas leakage and to detect leakage with open fire;
6. The appearance of this product is provided with a nameplate.

Tech Specs

No.号	Itrms	Requirement
1	Working medium	Nature gas LPG
2	Nominal diameter(mm)	DN25	DN40	DN50	DN80	DN100
3	Pressure range	0～0.4Mpa
4	Nominal pressure	0.8MPa
5	Operating Voltage	DC3～7.2V
6	Operating current	≤50mA（DC4.5V）
7	Max current	≤350mA(DC4.5V)
8	Blocked current	≤350mA(DC4.5V)
9	Operating temperature	－25℃～60℃
10	Storage temperature	－25℃～60℃
11	Operating humidity	5%～95%
12	Storage humidity	≤95%
13	ATEX	ExibⅡB T4 Gb
14	Protection class	IP65
15	Opening time	≤60s(DC7.2V)
16	Closing time	≤60s（DC7.2V）
17	Leakage	Under 0.4MPa, leakage ≤0.55dm³/h（compress time 2min）
		Under 5KPa, leakage≤0.1dm³/h（compress time2min）
18	Motor risistance	21Ω±3Ω
19	switch contact resistance	≤1.5Ω
20	Endurance	≥4000 times

Structure Specs

GDF (1)

Diameter	L	H	ΦA	ΦB	n x ΦC	D	G
DN25	140	212	Φ115	Φ85	4 x Φ14	51	18
DN40	178	246	Φ150	Φ110	4 x Φ18	67	18
DN50	178	262	Φ165	Φ125	4 x Φ18	76	18
DN80	203	300	Φ200	Φ160	8 x Φ18	91	20
DN100	229	317	Φ220	Φ180	8 x Φ18	101	20

Product detail pictures:

Related Product Guide:

All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for Free sample for 12 Volt Gasoline Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng , The product will supply to all over the world, such as: Brazil, Finland, Portland, Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.

Commercial Gas Shut Off Valve