12

product

Factory wholesale Lpg Gas Auto Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng

Model No.:

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our primary objective is usually to offer our shoppers a serious and responsible small business relationship, offering personalized attention to all of them for Remote Control Gas Shut Off Valve, 6 Pin Connector, Gas Oven Shut Off Valve, If needed, welcome to make contact with us by our web page or phone consultation, we will be delighted to serve you.
Factory wholesale Lpg Gas Auto Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng Detail:

Installation location

The floating-ball valve can be installed on the gas pipeline

GDF (2)

Product Advantages

Gas pipeline ball valve’s feature and advantages
1. The working pressure is large, and the valve can be opened and closed stably in the working environment of 0.4MPa;
2. The valve opening and closing time is short, and the valve opening and closing time is less than or equal to 50s under the limit working voltage of 7.2V;
3. There is no pressure loss, and the zero pressure loss structure design with the valve diameter equal to the pipe diameter is adopted;
4. The sealing performance of the closing valve is good, and the seal is made of nitrile rubber with high temperature resistance (60℃) and low temperature (-25℃).
5. With limit switch, it can accurately detect the in-position status of the switch valve;
6. The on-off valve runs smoothly, without vibration and with low noise;
7. The motor and gear box are fully sealed, and the protection level is ≥IP65, which completely prevents the transmission medium from entering, and has good explosion-proof performance;
8. The valve body is made of aluminum, which can withstand 1.6MPa pressure, resist shock and vibration, and adapt to complex environments;
9. The surface of the valve body is anodized, which is beautiful and clean and has good anti-corrosion performance;

Instruction For Use

1. The red wire and the black wire are the power wires, the black wire is connected to the positive electrode, and the red wire is connected to the negative electrode to open the valve;
2. Optional in-position signal output lines: 2 white lines are the valve-open in-position signal lines, which are short-circuited when the valve is in place; 2 blue lines are the valve-close in-position signal lines, which are short-circuited when the valve is in place; (After the valve is opened or closed, the power supply is usually extended for 5s to ensure the stability of the in-position signal)
3. The deceleration box of the valve can be rotated 180 degrees as a whole according to the convenience of the customer to install the control box, and the valve can be used normally after rotation;
4. Use standard flange bolts to connect valves, pipes, and flowmeters. Before installation, the end face of the flange should be carefully cleaned to prevent iron slag, rust, dust and other sharp objects on the end surface from scratching the gasket and causing leakage;
5. The valve should be installed in the pipeline or flowmeter with the valve closed. It is strictly prohibited to use it in the state of overpressure or gas leakage and to detect leakage with open fire;
6. The appearance of this product is provided with a nameplate.

 

Tech Specs

No.号

Itrms

Requirement

1

Working medium

Nature gas LPG

2

Nominal diameter(mm)

DN25

DN40

DN50

DN80

DN100

3

Pressure range

0~0.4Mpa

4

Nominal pressure

0.8MPa

5

Operating Voltage

DC3~7.2V

6

Operating current

≤50mA(DC4.5V)

7

Max current

≤350mA(DC4.5V)

8

Blocked current

≤350mA(DC4.5V)

9

Operating temperature

-25℃~60℃

10

Storage temperature

-25℃~60℃

11

Operating humidity

5%~95%

12

Storage humidity

≤95%

13

ATEX

ExibⅡB T4 Gb

14

Protection class

IP65

15

Opening time

≤60s(DC7.2V)

16

Closing time

≤60s(DC7.2V)

17

Leakage

Under 0.4MPa, leakage ≤0.55dm3/h(compress time 2min)

Under 5KPa, leakage≤0.1dm3/h(compress time2min)

18

Motor risistance

21Ω±3Ω

19

switch contact resistance

≤1.5Ω

20

Endurance

≥4000 times

Structure Specs

GDF (1)

Diameter

L

H

ΦA

ΦB

n x ΦC

D

G

DN25

140

212

Φ115

Φ85

4 x Φ14

51

18

DN40

178

246

Φ150

Φ110

4 x Φ18

67

18

DN50

178

262

Φ165

Φ125

4 x Φ18

76

18

DN80

203

300

Φ200

Φ160

8 x Φ18

91

20

DN100

229

317

Φ220

Φ180

8 x Φ18

101

20


Product detail pictures:

Factory wholesale Lpg Gas Auto Shut Off Valve - Pipeline Motor Floating-ball Valve  – Zhicheng detail pictures

Factory wholesale Lpg Gas Auto Shut Off Valve - Pipeline Motor Floating-ball Valve  – Zhicheng detail pictures

Factory wholesale Lpg Gas Auto Shut Off Valve - Pipeline Motor Floating-ball Valve  – Zhicheng detail pictures

Factory wholesale Lpg Gas Auto Shut Off Valve - Pipeline Motor Floating-ball Valve  – Zhicheng detail pictures


Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory wholesale Lpg Gas Auto Shut Off Valve - Pipeline Motor Floating-ball Valve – Zhicheng , The product will supply to all over the world, such as: Czech republic, Israel, Greenland, We now have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we've been looking forward to even greater cooperation with overseas customers based on mutual benefits. You should feel free to contact us for more details.
  • The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
    5 Stars By Emma from Durban - 2017.08.21 14:13
    This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
    5 Stars By Fernando from Paris - 2018.10.09 19:07