China Factory Promotional Water Heater Lp Gas Valve - Pipeline Motor Floating-ball Valve – Zhicheng Manufacture and Factory

Factory Promotional Water Heater Lp Gas Valve - Pipeline Motor Floating-ball Valve – Zhicheng

Model No.:

Short Description:

Product Detail

Product Tags

Feedback (2)

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Lpg Gas Control Valve, Oxygen Shut Off Valve, Tuya Zigbee 3.0 Thermostat, Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !

Factory Promotional Water Heater Lp Gas Valve - Pipeline Motor Floating-ball Valve – Zhicheng Detail:

Installation location

The floating-ball valve can be installed on the gas pipeline

GDF (2)

Product Advantages

Gas pipeline ball valve’s feature and advantages
1. The working pressure is large, and the valve can be opened and closed stably in the working environment of 0.4MPa;
2. The valve opening and closing time is short, and the valve opening and closing time is less than or equal to 50s under the limit working voltage of 7.2V;
3. There is no pressure loss, and the zero pressure loss structure design with the valve diameter equal to the pipe diameter is adopted;
4. The sealing performance of the closing valve is good, and the seal is made of nitrile rubber with high temperature resistance (60℃) and low temperature (-25℃).
5. With limit switch, it can accurately detect the in-position status of the switch valve;
6. The on-off valve runs smoothly, without vibration and with low noise;
7. The motor and gear box are fully sealed, and the protection level is ≥IP65, which completely prevents the transmission medium from entering, and has good explosion-proof performance;
8. The valve body is made of aluminum, which can withstand 1.6MPa pressure, resist shock and vibration, and adapt to complex environments;
9. The surface of the valve body is anodized, which is beautiful and clean and has good anti-corrosion performance;

Instruction For Use

1. The red wire and the black wire are the power wires, the black wire is connected to the positive electrode, and the red wire is connected to the negative electrode to open the valve;
2. Optional in-position signal output lines: 2 white lines are the valve-open in-position signal lines, which are short-circuited when the valve is in place; 2 blue lines are the valve-close in-position signal lines, which are short-circuited when the valve is in place; (After the valve is opened or closed, the power supply is usually extended for 5s to ensure the stability of the in-position signal)
3. The deceleration box of the valve can be rotated 180 degrees as a whole according to the convenience of the customer to install the control box, and the valve can be used normally after rotation;
4. Use standard flange bolts to connect valves, pipes, and flowmeters. Before installation, the end face of the flange should be carefully cleaned to prevent iron slag, rust, dust and other sharp objects on the end surface from scratching the gasket and causing leakage;
5. The valve should be installed in the pipeline or flowmeter with the valve closed. It is strictly prohibited to use it in the state of overpressure or gas leakage and to detect leakage with open fire;
6. The appearance of this product is provided with a nameplate.

Tech Specs

No.号	Itrms	Requirement
1	Working medium	Nature gas LPG
2	Nominal diameter(mm)	DN25	DN40	DN50	DN80	DN100
3	Pressure range	0～0.4Mpa
4	Nominal pressure	0.8MPa
5	Operating Voltage	DC3～7.2V
6	Operating current	≤50mA（DC4.5V）
7	Max current	≤350mA(DC4.5V)
8	Blocked current	≤350mA(DC4.5V)
9	Operating temperature	－25℃～60℃
10	Storage temperature	－25℃～60℃
11	Operating humidity	5%～95%
12	Storage humidity	≤95%
13	ATEX	ExibⅡB T4 Gb
14	Protection class	IP65
15	Opening time	≤60s(DC7.2V)
16	Closing time	≤60s（DC7.2V）
17	Leakage	Under 0.4MPa, leakage ≤0.55dm³/h（compress time 2min）
		Under 5KPa, leakage≤0.1dm³/h（compress time2min）
18	Motor risistance	21Ω±3Ω
19	switch contact resistance	≤1.5Ω
20	Endurance	≥4000 times

Structure Specs

GDF (1)

Diameter	L	H	ΦA	ΦB	n x ΦC	D	G
DN25	140	212	Φ115	Φ85	4 x Φ14	51	18
DN40	178	246	Φ150	Φ110	4 x Φ18	67	18
DN50	178	262	Φ165	Φ125	4 x Φ18	76	18
DN80	203	300	Φ200	Φ160	8 x Φ18	91	20
DN100	229	317	Φ220	Φ180	8 x Φ18	101	20

Product detail pictures:

Related Product Guide:

Our concentrate on is always to consolidate and enhance the excellent and service of present solutions, in the meantime regularly develop new products to meet distinctive customers' demands for Factory Promotional Water Heater Lp Gas Valve - Pipeline Motor Floating-ball Valve – Zhicheng , The product will supply to all over the world, such as: Bolivia, Libya, Mauritania, Our company, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by iso9000 quality management standard strictly , creating top-ranking company by spirit of progress-marking honesty and optimism.

Csst Shut Off Valve