12

product

Factory Customized Intelligent Household Valve to Prevent Gas Leakage

Model No.: RKF-4Ⅱ

Short Description:

Model No.: RKF-4Ⅱ Built -in Shut-off Motor Valve for Smart Gas meter
This product is a special valve installed in a gas meter to control gas disconnection.The product adopts a snap-on design and does not use screws, which greatly improves the corrosion resistance. It can be assembled into various specifications of gas meters. In addition, it has the characteristics of low cost and low pressure loss.


Product Detail

Product Tags

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Factory Customized Intelligent Household Valve to Prevent Gas Leakage, We hope we can easily have a friendly partnership with businessman from all around the globe.
In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of China Valve and Motor Valve, Our production have been exported to more than 30 countries and regions as first hand source with lowest price. We sincerely welcome customers from both at home and abroad to come to negotiate business with us.

Installation location

The motor valve may be installed in the smart gas meter.

Valve installation

Product Advantages:

Built-in screw Motor Valve’s Advantages
1.Low pressure drop
2.Stable structure Max pressure can reach 200mbar
3.Small shape, easy installing
4.Low costs
5.Snap design with high rust resistance

Instruction For Use

1.Two-line, four-line and five-line models are available for this type of valve. The red wire is connected to positive power (or negative power), and the black wire is connected to negative power (or positive power) to open the valve (specifically, it can be set according to customer needs). The other 2 or 3 wires can be signal wires of open/close.
2.Four-wire or five-wire valve opening and closing process time setting: When opening and closing the valve, when the detection device detects that the opening or closing valve is in place, it needs to delay 300ms before stopping the power supply, and the total time of opening the valve is about 1s.
3.The minimum drive voltage of the valve shall not be lower than 3V. If the current limit design is in the process of opening and closing the valve, the current limit value shall not be lower than 120mA
4.The motor valve opening and closing can be judged by detecting the locked-rotor current in the circuit. The locked-rotor current value can be calculated according to the working cut-off voltage of the circuit design, which is only related to the voltage and resistance value.

Tech Specs

Items requirements Standard

Working medium

Natural gas,LPG

Flow range

0.016~6m3/h

Pressure Drop

0~15KPa

Meter suit

G1.6/G2.5

Operating voltage

DC3~3.9V

ATEX

ExicⅡBT4 Gc

EN 16314-2013 7.13.4.3

Operating temperature

-25℃~60℃

EN 16314-2013 7.13.4.7

Relative humidity

5%~90%

Leakage

2KPa or 7.5ka 1L/h

EN 16314-2013 7.13.4.5

Motor electric performance

21±10%Ω/14±2mH

Current-limited resistance

9±1%Ω

Max current

≤140mA(DC3.9V)

opening time

≤1s(DC3V)

Closing time

≤1s(DC3V)

Pressure loss

With meter case≤200Pa

EN 16314-2013 7.13.4.4

endurance

≥10000次

EN 16314-2013 7.13.4.8

Installation location

Inlet

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Factory Customized Intelligent Household Valve to Prevent Gas Leakage, We hope we can easily have a friendly partnership with businessman from all around the globe.
Factory Customized China Valve and Motor Valve, Our production have been exported to more than 30 countries and regions as first hand source with lowest price. We sincerely welcome customers from both at home and abroad to come to negotiate business with us.


  • Previous:
  • Next: