Europe style for China G1.6 Screw Valve for Shut off Gas Meter When Unprepaid
We’re going to devote ourselves to offering our esteemed shoppers with the most enthusiastically thoughtful expert services for Europe style for China G1.6 Screw Valve for Shut off Gas Meter When Unprepaid, Welcome to visit our corporation and manufacturing unit. Be sure to feel totally free to get in touch with us in case you need any even more assistance.
We’re going to devote ourselves to offering our esteemed shoppers with the most enthusiastically thoughtful expert services for China Valve, Inner Screw Valve, With the development of the society and economy, our company will continue the “loyalty, dedication, efficiency, innovation” spirit of enterprise, and we are going to always adhere to the management idea of “would rather lose gold, do not lose customers heart”. We are going to serve the domestic and foreign businessmen with sincere dedication, and allow us to create bright future together with you!
Installation location
The motor valve may be installed in the smart gas meter.
Product Advantages:
Built-in screw Motor Valve’s Advantages
1.Low pressure drop
2.Stable structure Max pressure can reach 200mbar
3.Small shape, easy installing
4.Low costs
5.Snap design with high rust resistance
Instruction For Use
1.Two-line, four-line and five-line models are available for this type of valve. The red wire is connected to positive power (or negative power), and the black wire is connected to negative power (or positive power) to open the valve (specifically, it can be set according to customer needs). The other 2 or 3 wires can be signal wires of open/close.
2.Four-wire or five-wire valve opening and closing process time setting: When opening and closing the valve, when the detection device detects that the opening or closing valve is in place, it needs to delay 300ms before stopping the power supply, and the total time of opening the valve is about 1s.
3.The minimum drive voltage of the valve shall not be lower than 3V. If the current limit design is in the process of opening and closing the valve, the current limit value shall not be lower than 120mA
4.The motor valve opening and closing can be judged by detecting the locked-rotor current in the circuit. The locked-rotor current value can be calculated according to the working cut-off voltage of the circuit design, which is only related to the voltage and resistance value.
Tech Specs
Items | requirements | Standard |
Working medium |
Natural gas,LPG |
|
Flow range |
0.016~6m3/h |
|
Pressure Drop |
0~15KPa |
|
Meter suit |
G1.6/G2.5 |
|
Operating voltage |
DC3~3.9V |
|
ATEX |
ExicⅡBT4 Gc |
EN 16314-2013 7.13.4.3 |
Operating temperature |
-25℃~60℃ |
EN 16314-2013 7.13.4.7 |
Relative humidity |
5%~90% |
|
Leakage |
2KPa or 7.5ka <1L/h |
EN 16314-2013 7.13.4.5 |
Motor electric performance |
21±10%Ω/14±2mH |
|
Current-limited resistance |
9±1%Ω |
|
Max current |
≤140mA(DC3.9V) |
|
opening time |
≤1s(DC3V) |
|
Closing time |
≤1s(DC3V) |
|
Pressure loss |
With meter case≤200Pa |
EN 16314-2013 7.13.4.4 |
endurance |
≥10000次 |
EN 16314-2013 7.13.4.8 |
Installation location |
Inlet |
We’re going to devote ourselves to offering our esteemed shoppers with the most enthusiastically thoughtful expert services for Europe style for China G1.6 Screw Valve for Shut off Gas Meter When Unprepaid, Welcome to visit our corporation and manufacturing unit. Be sure to feel totally free to get in touch with us in case you need any even more assistance.
Europe style for China Valve, Inner Screw Valve, With the development of the society and economy, our company will continue the “loyalty, dedication, efficiency, innovation” spirit of enterprise, and we are going to always adhere to the management idea of “would rather lose gold, do not lose customers heart”. We are going to serve the domestic and foreign businessmen with sincere dedication, and allow us to create bright future together with you!